Wednesday 11 November 2015

Frostgrave: a quick Ruined Building

Introduction

Since I started on my Frostgrave adventure, I've built plenty of wizards and quite a few undead monsters, with some soldiers and more critters to come.  However, the game is heavily dependent on terrain as well, so I thought I'd better plan for that too.

Having ransacked my spares boxes, I came up with this:


It's a relatively cheap kit that I bought long ago, though I'd never built it because I'm not a great fan of the "techno gothic" look.  It never occurred to me that these ruins could be built in any other way - but they can!

The Ruins

OK, so I had a kit, but what could I do with it?  The box came with 6 identical sprues, each containing 1 long and 1 short wall, as well as 1 tall and 1 short cylindrical joining piece.

Now I really didn't want to spend a lot of effort on this project, so I cut the parts from the sprue (quite crudely, by my standards) and glued them together.  This took only part of 1 evening, so not a great deal of effort at all.  In the end, my 12 wall pieces made 3 "L" shapes, 1 "T" and 1 "Z" shape.


To paint these, I wanted to keep it easy.  I sprayed the built models just once, but with a "stone-textured" paint that I bought from my nearest D.I.Y store.  As well as adding some black and white flecks to the overall grey of the walls, this had the added effect of covering up or softening much of the "techno" detail.  It's not something that I would wish for in many models (indeed, it would be something of a disaster for most!), but in this case the effect was just what I had hoped!

My only concession to extra painting was to apply a thin, dark green colour vertically to some areas, to simulate water stains.

The walls still looked a little bare, so I added some vegetation growing out of various nooks and crannies in the ruin.  This was made from rubberised horsehair, covered with glue and then flock (there's slightly more to it than that; I'm keeping it simple for this article).  However, it didn't require much work at all.

Conclusion


So there we are: another old kit saved from an eternity of pointlessness by being turned into a model that I hope will be very useful.  There are enough parts here to build quite a substantial ruined building, or possibly 2 smaller ones.

I did consider adding full or partial bases to these pieces and I also thought of adding snow over the highest points.  In the end I avoided both these ideas.  Firstly, it would have added extra time and effort to what was supposed to be a really simple, cheap build and secondly, snow or a particular colour of dirt would reduce the versatility.  After all, as it stands I could use these ruins for games in other settings too: grassy plains, scorched wildernesses, overgrown jungles...

16 comments:

  1. What a find! Looks perfect for the job.

    ReplyDelete
    Replies
    1. Thanks, Michael. They turned out much better than I thought they might.

      Delete
  2. I am also not a fan of the techno gothic look, but these will suit Frostgrave very well indeed. A tremendously good find.

    ReplyDelete
    Replies
    1. Well, they're not technically a "find" since I hadn't lost them - though I suppose you could use the term for a re-discovery :-) . Anyway, they'll do well enough. Thanks, Clint.

      Delete
  3. A great find C6! Nice job on them too dude.

    ReplyDelete
    Replies
    1. For a quick-and-dirty build, they've turned out much better than I had hoped!

      Delete
  4. Once assembled, these don't look that Gothic or "techy" to me and with the colouring you've used can indeed be now used in many setting. Great stuff C6

    ReplyDelete
    Replies
    1. The textured paint has done a very good job of obscuring the details, hasn't it :-) ? Thanks, Joe.

      Delete
  5. Very nice I know exactly what you mean about the 40k look. There are some coll ruined sets you can get from 4 Ground. But as you already have it I understand free is better! I am still struggling with my own ruins from the Mars Attacks game I need to more filling but cba at the moment.

    ReplyDelete
    Replies
    1. I suppose they're not really "free", since I did pay for them - albeit many, many years ago. Still, it's nice not to be shelling out too much on this project (at least, it would be except that I'm ordering quite a lot of other stuff instead!)

      Delete
  6. A good quick work. The result is good on a table. Well done.

    ReplyDelete
    Replies
    1. Thanks, Cedric. That was very much the point of this work - to get the models on the table as quickly as possible!

      Delete
  7. Willl look great when painted C6!

    ReplyDelete
    Replies
    1. After I posted this article, I varnished these models (partly because the "stone effect" spray paint was still slightly tacky). That hasn't changed the appearance, though: they're done!

      Delete
  8. Good call on the vegetation. Makes the pieces look better.

    ReplyDelete
    Replies
    1. It's very common (around here, at any rate) to see Buddleia shrubs growing from pretty much anywhere on a semi-derelict building. Even in a colder climate, I imagine that some type of plant would colonise such a structure.

      You're right; it does improve the models :-) .

      Delete