Sunday 7 January 2018

Congo: the Village

Introduction

For some time now, I've wanted to have models of an African village for my games of Congo or Tarzan-based Pulp Alley.  Well, just before Christmas I ordered a few pieces from Grand Manner and they arrived in almost the last delivery before the festive period shutdown.  Here they are, in their finished glory!



The Enclosure


This is the "Large timber circular animal corral" (TA02), retailing at £15.  It's a fairly hefty lump of resin, quite jagged around the top.  I'm amazed at how the manufacturer has managed to cast such a piece at all, as there are so many nooks and crannies which must make it tricky!

First, the negatives:
  • On close inspection there is clear webbing between a number of the branches.
  • My copy had a number of air bubbles and/or seemingly miscast ends of branches.
  • There are also a few long, straight rods on the floor of the enclosure; these look as if they might be bristles from a brush that was used during manufacture, rather than intentional detail.
Now that's out of the way, here are the good points:
  • None of the above really matters!  The imperfections are either lost in the paintwork or hidden in the interior of the hedge.  I haven't applied any remedial work (filler, sanding...) to this model and it still looks pretty good in the photo above, or so I think.
After I had painted the main part of the enclosure, I felt that the interior was a bit barren and lifeless.  To soften this, I painted some of the slightly more raised "lumps" in a dark brown to represent piles of animal dung.  I also gave the "bristles" a light coat of pale green, so that the might stand in for grass stalks or some similar vegetable matter.


The Huts

Mangbettu circular hut (TA09)
Mangbettu circular hut (TA10)
Mangbettu circular hut (TA11)
Grand Manner make five different patterns of "Mangbettu" huts, but I have only bought three of them (mainly to keep the cost down; each of these models cost £13).  The Mangbetu (spelling varies) come from central Africa; more precisely modern day Zaire.  As such, their huts are very suitable for games of Congo - especially for Forest Tribes.

The three huts shown here are all good models, representing several variations on an obvious common theme.  I particularly like the addition of pots or shields just outside the doors; this gives them a more "lived in" feel.

Two of the huts have painted, patterned plaster on the walls.  This makes them nicely decorative and is completely suitable for the region and pattern of dwelling.  I felt that the sculpting of the decoration was a bit crude, though it's not too noticeable once painted.

Also note that the door curtains of the huts appear to have been modelled from cloth bandage or some similar material.  This is fine, except that on one of the huts (TA10?) a stray thread has escaped and has then been moulded onto the surface of the curtain.  Again, it's not something that you'd really notice unless you know where to look.


The Cooking Fire


The smallest piece in this collection from Grand Manner is the fireplace, yet it probably took the longest time to paint.  That's because it has a lot of different items on it, each of which required different colours.  Here's a list:

  • The central fire itself, with a large cauldron of something bubbling away on top.
  • 2 pots.  I have painted these up to represent earthenware (hmm - perhaps I should have added some decoration to them?), though I suppose they could just as easily have been metal.
  • Several large rocks.
  • Baskets, both empty and containing foodstuffs.
  • A pile of firewood, next to a large mass that was hard to interpret.  I have decided in my version that this represents foliage and twigs that has been removed from the firewood, so I painted it green.
  • A slaughtered animal (goat or sheep?) beside a large club.  How do I know that it's dead?  Well, for starters it's missing its head!



The Village Women


I have some models of African villagers already, but I finished these remaining figures at the same time as the village.  They's probably models from Foundry Miniatures, though I haven't verified that.  Anyway, they're easy to paint and will help to add some life to the village.


Conclusion

Could I have scratch-built the village?  Well, yes of course I could - but it wouldn't have had so much detail and would have taken a lot longer (probably forever, to be honest).  These models are somewhat expensive, though not really that much when compared with a week's commuting, a meal out, or a large Games Workshop figure.  From my perspective, I'm very glad to trade off the money against the time it would have taken; I've ended up with some lovely terrain pieces!

So, what else is needed for the village?  I'm really not sure, though examination of old photos suggests that having chickens running all over the place might be appropriate.  Also, some pictures seem to show racks (for curing skins or to dry leafy crops?) in villages like this.  There's so much more that I could do...

13 comments:

  1. Great review and paint-jobs, Colgar6. The huts and corral look terrific, and I love the village women too. What a great collection of models for your Congo village.

    ReplyDelete
    Replies
    1. Thanks. It's a good start, but I can't help feeling that I need some clutter as well :-) .

      Delete
  2. Nicely done! I agree, small imperfections in the resin needn't be a problem if the texture represents a rough surface like cut branches and so on.

    ReplyDelete
    Replies
    1. Indeed! I suspect that if I hadn't mentioned the imperfections then no-one would have noticed that there were any :-) .

      Delete
  3. Decent review and blog post. Cheers for that, as I'm interested in similar terrain items.

    ReplyDelete
    Replies
    1. Well, I'm very pleased if this article has helped you, Roy :-) .

      Delete
  4. All good stuff despite a few shall we say not perfect casts. I am particularly ford of the enclosure but suspect I will now make my own. Over all brilliant though and well worth looking at how you have painted each one. I thank you.

    ReplyDelete
    Replies
    1. Thanks, Clint. If you have the time and the patience then it should be easy enough to make a tree-branch enclosure. Since I have neither, I found it simpler to buy the Grand Manner one :-) ...

      Delete
    2. Apon seeing it I thought that very thing. As I trained as an architectural modelmaker (Before-during) break down I am sure I could make one now I have the inspiration.

      Delete
  5. You've really brough these huts to life with graint brushwork !
    The enclosure really does 'beef'the villahge out too.

    ReplyDelete
    Replies
    1. Thanks, Joe! Of course, I really need some African cattle models to make your last remark work properly :-) .

      Delete
  6. You nailed the color scheme and brought the pieces to life. 'Nuff said :)

    ReplyDelete
    Replies
    1. Glad you liked it. I'm quite pleased with how these huts turned out myself :-) .

      Delete